User Manual

26
4.5.8 REBUILD DATA
The REBUILD function attempts to repair corrupted ID data. Use this function if the DT210
locks up when accessing ID or transaction data.
Activate the SELF TEST menu and press the ENTER key .
The DT210 prompts "REBUILD DATA".
Press ENTER to continue.
The DT210 prompts: "DATA RECOVERY N".
Press the 'Y' key and the ENTER to continue.
The DT210 prompts "ARE YOU SURE N".
Press the 'Y' key and then the ENTER key to REBUILD the ID data files.
4.5.9 PROGRAM VERSION
The DT210 can perform many different applications. An application program is installed into
the DT210 via a Read Only Memory (ROM). The application program ID is viewed by pressing
the 'V' key when the DT210 is in the 'idle' mode.