User Manual

2
For example: the CLEAR MEMORY key presents the following menu.
CLEAR TOTALS
ERASE MEMORY
INITIALIZE SYSTEM
Press the CLEAR MEMORY key. Press the CONTINUE key several times. The above listed
menu selections are displayed one after another. Press the REVIEW key several times. The list is
displayed in reverse order. Press the CLEAR ENTRY key to exit the CLEAR MEMORY menu.
Note: When a menu is being scanned, the numeric display will show the current menu selection
number in the form "-----X" where X is the menu number.
2.2 INITIALIZE SYSTEM
Press the CLEAR MEMORY key. Press the CONTINUE key until the DT210 displays
'INITIALIZE SYS'. Press the ENTER key.
NOTE: DO THIS FUNCTION 1 TIME ONLY! (When installing the DT210.)Initialize system
erases all of memory, writes the default page-printer data, and sets some of the configuration
parameters to default values.
3.0 CONFIGURE THE DT210
The configuration process is used to tailor the DT210 to your exact requirements. The
configuration procedure is described in 3 sections:
Section 3.1 CONFIGURE STANDARD PARAMETERS
Section 3.2 CONFIGURE PAGE PRINTER
Section 3.3 CONFIGURE APPLICATION PARAMETERS
The standard parameters are common to all DT210 applications. The application parameters
differ from one application to the next.
3.1 CONFIGURE STANDARD PARAMETERS