User Manual

3
The standard configuration parameters for the DT210 are as follows:
3.1.0 SET CLOCK Set time and date.
3.1.1 CONFIG SER PORT1 Set baud rate and data format for port 1.
3.12 CONFIG SER PORT2 Set baud rate and data format for port 2.
3.1.3 CONFIG SCALE Select meter type, set units (ex. LB, KG...) and
count-by (ex. 1, 2, 5, .).
3.1.4 CONFIG PRINTER Select printer type.
3.1.5 CONFIG PASSWORD Enable and set password protection.
3.1.6 PRINT 210 CFG Send config data to the printer.
Press the CONFIGURE key to begin the configuration process.
Press the CONTINUE key to scan the configure menu.
Press the ENTER key to activate a configure function.