Manual

DT220 Users Manual version 1.a Configuration Parameters

1 - AND: <status>, <mode>, <polarity><weight><units><terminate>

Status: OL (overload), ST (stable), US (unstable, in motion)

Mode: GS (gross mode), NT (net mode)

Polarity: + (positive weight), - (negative weight)

Weight: 7 characters data, NOT zero blanked, with decimal point

Units: lb, kg, t (ton), tn (tonne), g<sp> (gram), oz

Terminate: lf, cr (line feed, carriage return)

2 - CONDEC: <stx><polarity><weight><units><mode>>status><terminate>

Polarity: space (positive weight), - (negative weight)

Weight: 7 characters, zero blanked, with decimal point

Units: L (lb), K (kg), T (ton), G (gram), O (oz)

Mode: G (gross mode), N (net mode)

Status:

<space> (valid weight), M (motion), O (over wt), I(invalid)

Terminate: lf, cr (line feed, carriage return)

3 - WEIGHTRONIX: <mode1><mode2><polarity><weight><space><units><term>

Mode1: space (gross mode), 0 (zero if net mode)

Mode2: G (gross mode), N (net mode)

Polarity: + (positive weight), - (negative weight)

Weight: 6 characters, NOT zero blanked, with decimal point

Units: lb, kg, oz, g <space>(gram), t<space> (ton), tn (tonne)

Terminate: lf, cr (line feed, carriage return)

4 - OHAS: <polarity><weight><space><units><2 spaces><mode><status><term>

Polarity: space (positive weight), - (negative weight)

Weight: 7 digits, zero blanked, with decimal point

Units: lb, kg, oz, g <space>(gram), t<space> (ton), tn (tonne)

Mode: G (gross mode), N (net mode)

Status: <space> (valid weight), M (motion), O (over wt), I(invalid)

Terminate: lf, cr (line feed, carriage return)

5 - Transmits the contents of DT220 registers.

Data entered into a text register can include other register data. Example of register 128

(Text1) emulating a Condec format without the polarity or status in Gross mode with lbs

units. Set TX Continuous Format setting to 128 and configure text register 128 to: