Manual

DT220 Users Manual version 1.a Configuration Parameters
25
Disable numeric register edit 1&2, 3&4 and 5&6, if “Y” (yes) is selected the
corresponding set of registers will become read only disabling the ability to edit/change
any of the values from the keyboard using the ID Tables key.
Numeric ID registers 1&2
Tables 1, 2 and 3 numeric ID registers 1&2 are used for Total and Subtotals
Table 4 numeric ID registers 1&2 are used for the sequence number and gross
Table 5 and 6 numeric ID registers 1&2 are not used in the standard program
Numeric ID registers 3&4
Tables 1, 2 and 3 numeric ID registers 3&4 are used for Total and Subtotals
Table 4 numeric ID registers 1&2 are used for the sequence number and gross
Table 5 and 6 numeric ID registers 1&2 are not used in the standard program
Text ID registers 2&3
Table 1 (Vehicle) = Customer and Product
Table 2 (Customer) = Name and Address
Table 3 (Product) = Name, register 3 is not used in the standard program
Table 4 (Transaction) = Truck and customer
Tables 5 and 6 the text registers are not used in the standard program
ID text registers 4&5
Table 1 (Vehicle) = Not used in the standard program
Table 2 (Customer) = City and State
Table 3 (Product) = Not used in the standard program
Table 4 (Transaction) = Product and transaction time and date
Tables 5 and 6 the text registers are not used in the standard program
Auto Erase ID Records is used in some applications to determine if an ID record should
be erased after being used or be retained in memory for later use.
Edit numeric register names
Each ID record has 8 numeric registers. Use this function to name the registers in an ID
table. If a register is NOT named, it does not display in database maintenance functions
and it is not printed in database reports.
Edit text register names
Each ID record has 8 text registers. Use this function to name the registers in an ID table.
If a register is NOT named, it does not display in database maintenance functions and it is
not printed in database reports.