User's Manual

Technical Document

Indyme Solutions, Inc. 8295 Aero Place  San Diego, CA 92123 USA +1.858.268.0717  +1.800.829.6141 Page 6 of 7

Inserting Graphics into the Button Dome

Included with this help button is a collection of button graphics that can be exchanged prior to

installation. The button dome was designed with alignment tabs inside to allow easy orientation

alignment and installation.

1. Select the desired graphic from the collection.

2. Determine the mounting orientation of the help button from the pictures above; F, C, or P.

3. Remove the default graphic from the button dome using a small screwdriver, being careful not

to scratch the plastic.

4. Align the notches in the new graphic with the tabs inside the button dome, and gently press the

graphic into place. You will want to use your finger to fully seat the graphic until it is completely

smooth against the button dome.

Notches

Tabs