DOCUMENT CAMERA USER MANUAL Please read this manual carefully before operating the document camera and keep it for reference.
NOTICE Use the document camera under the rated electric conditions. Do not place the document camera on any unstable surface. It may fall and cause injuries or damages. Do not place this device under direct sunlight or near heaters. Do not place this device near water. Keep the camera away from acid or alkali gas. Do not place this document camera in humid, dusty, windy or vibrant locations.
PARTS NAME 1 HD camera, 90o rotatable ○ 2 IR receiver ○ 3 LED lamp ○ 4 Gooseneck ○ 5 Control panel ○ 6 Embedded MIC ○ 7 Zoom in/out knob ○ 8 Kensington lock ○ 9 Inputs and outputs ○ 3
INPUTS AND OUTPUTS 1 DC5V, Power input. ○ 2 VGA IN, VGA input. ○ 3 AUDIO IN, Audio input. ○ 4 VGA OUT, VGA output. ○ 5 AUDIO OUT, Audio output ○ 6 HDMI IN, HDMI input. ○ 7 HDMI OUT, HDMI output. ○ 8 PC, USB connector, used to connect with PC, to get the camera image by PC with ○ the provided software. 9 USB, USB connector, 1. used to connect with mouse, tablet or touch panel, to ○ make annotation. 2. used to connect with USB memory stick, to save and recall the image or video clip.
CONTROL PANEL 1 HOME, To switch back to camera image. ○ 2 SOURCE, To switch to HDMI input/VGA input. ○ 3 USB CAM, To change the USB function. ○ A> Press to active USB camera, to get the camera image by PC with the provided software. B> Keep press for 3 seconds to active storage function, PC will recognize the visualize as Memory stick, PC can read and download the pictures and video clips that saved in the visualizer directly.
8 LAMP, To turn on/off the LED light.. ○ 9 DELETE, To delete the selected saved images. ○ 10 SPLIT, To get image split. ○ 11 FREEZE, To freeze the current on-screen image ○ 12 ROTATE, To rotate the image. ○ 13 ○ 14 FOCUS+/-, To adjust the focus manually. ○ 15 MENU, To active the menu, adjusting the system setting. ○ 16 RETURN, To back to the previous setting. ○ 17 OK, To confirm the selection. ○ 18 ARROW, ○ A> To select the saved image when image recall mode is enabled.
REMOTE CONTROL 7
FAQ 1. USB Camera Connect the “PC” port of visualizer to the PC with provided USB cable. Press “USB CAM” button when visualizer is on. PC will install SWT USB2.0 Camera driver in first time. When finish, please run the software provided in CD. Or you can download the software “Amcap” in Windows. For MAC system, Please use Photo Booth or Facetime to get camera image, please change the setting:
TROUBLE SHOOTING Symptoms Possible causes/counter-measures No image ٭Check power adaptor ٭Power cord is not properly connected. ٭VGA/HDMI cables are not properly connected. ٭Press Home to back to camera image. No response when press control ٭To check if freeze function is active. panel ٭To check if switched to VGA or HDMI input. No response when press remote ٭To check if there is battery in remote control.
SPECIFICATIONS Model GS801N Total pixel 8 Megapixel (3840x2160) Sensor 1/2.
