User guide

6 - 9
PN 074-566-P1B
Composer Elite Operating Manual
6.3.5 Sensor Version
Once a sensor is communicating with Composer Elite Multi-Sensor Software,
Sensor Disabled (on the appropriate sensor tab) can be pressed. Sensor
Enabled is displayed, indicating everything is functioning properly. The sensor
firmware version will also be displayed. See Figure 6-6.
Figure 6-6 Sensor firmware version
6.3.6 Description
The datalog file contains a header that has information about the process, including
date and the time. An optional 70 character header may be typed into the
Description text box (see Figure 6-7). This description will be written to the file
when the file is initially created. The sensor must be enabled in order to access this
field.
Figure 6-7 Description text box
6.3.7 Parameters
Composer Elite Multi-Sensor Software includes library of the most widely used
carrier and precursor gases (see Material Table on page B-1.) Please contact
INFICON if you are using gases other than those shown in the Material Table.
Once a parameter is changed, exiting the field will update the parameter in
Composer Elite. Changes made at the Composer Elite front panel will not be
updated until the sensor is Sensor Disabled then Sensor Enabled. The current
values displayed represent the values in Composer Elite when the sensor was
enabled in the software program.