User guide

6 - 16
PN 074-566-P1B
Composer Elite Operating Manual
6.3.13 Composer Elite Multi-Sensor Software Warnings and Errors
The warnings and errors log (see Figure 6-16) displays a list of faults, either when
a fault occurs or when a fault is removed. Click Error Detected to clear the display.
The faults are communications errors (refer to section 5.7, Composer Elite
Communications Examples, on page 5-37).
Warnings are temporary conditions, which are expected to be self-correcting.
Non-fatal errors are recoverable when the fault disappears and require no
intervention. In the case of a fatal error, which indicates a hardware problem,
Composer Elite must be rebooted (power off, then power on).
Figure 6-16 Warning and errors log
6.3.13.1 Error Messages
Action could not be completed
Comm Error - Access denied, port may already be opened)
Comm Error - Argument passed is null
Comm Error - Argument passed is out of range
Comm Error - Checksum error on received data message
Comm Error - Invalid offset into buffer
Comm Error - The specified port is not open
Comm Error - Transmit / Receive Command error
Comm Error - Unknown Exception
Comm. Error - Communication Timeout
Comm. Error - Port failure
Data requested not currently available
Invalid Checksum
Invalid Command - Unknown Error Value
Invalid Data
Invalid Data Returned
Invalid message length for command
Invalid Program Number
Invalid Sensor Number
Message Timeout
Received message length is zero