User guide

1 - 5
PN 074-566-P1B
Composer Elite Operating Manual
1.4 Unpacking and Inspection
1 If Composer Elite has not been removed from its shipping container, do so now.
Do not discard the packing materials before reading the following steps.
2 Carefully examine Composer Elite for damage that may have occurred during
shipping. This is especially important if you notice obvious rough handling on
the outside of the container. Immediately report any damage
to the carrier and to INFICON.
3 Take an inventory of your order by referring to the configuration code in your
order invoice and the information shown in section 1.4.1 and Figure 1-2.
4 Perform a power-up verification of the Sensor Control Unit. (See section 1.4.2.)
5 For additional information or technical assistance, contact INFICON
(Refer to section 1.3).