User guide

2 - 12
PN 074-566-P1B
Composer Elite Operating Manual
5 Insert the 24 V Power Supply output-cable connector into the Sensor Control
Unit power connector until it locks in place. (Refer to Figure 2-5.)
6 Connect the power cord to the 24 V Power Supply inlet receptacle.
7 Connect the power cord plug to Mains power. (Refer to section 1.5.4.2, Rated
Input, on page 1-12.)
2.2.4 Installing Composer Elite Multi-Sensor Software
See section Chapter 6, Composer Elite Multi-Sensor Software, on page 6-1.