User guide

5 - 10
PN 074-566-P1B
Composer Elite Operating Manual
Table 5-9 Instance #4 (COS/Cyclic Producing)
# Name Access Type Comments
1 State Get USINT 0 = Nonexistent
1 = Configuring
2 = Waiting for Connections ID
3 = Established
4 = Timeout
2 Instance Type Get USINT 0001h (I/O Connection)
3 Transport Class Trigger Get BYTE 00h = Client, Cyclic, Class 0, No Ack.
10h = Client, COS, Class 0, No Ack.
02h = Client, Cyclic, Class 2, Ack.
12h = Client, COS, Class 2, Ack.
4 Produced Connection ID Get UINT CAN ID for Transmission
5 Consumed Connection ID Get UINT FFFFh = No Ack.
Other = CAN ID for reception (Ack.)
6 Initial Comm Characteristics Get BYTE 0Fh = Producing only over message,
group 1 (No Ack.)
01h = Produces over message, group 1
- Consumes over message, group 2 (Ack.)
7 Produced Connection Size Get UINT Corresponds to Fieldbus Input size
8 Consumed Connection Size Get UINT 0000h (consumes 0 bytes on this
connection)
9 Expected Packet Rate Get/Set(a) UINT Timing associated with this connection
12 Watchdog Timeout Action Get/Set(a) USINT 0000h (Transition to the timed out state)
13 Produced Connection Path Length Get UINT 0007h
14 Produced Connection Path Get EPATH 20 04 25 96 00 30 03h
15 Consumed Connection Path
Length
Get UINT 0000h (No Ack.)
0005h (Ack.)
16 Consumed Connection Path Get EPATH No Value (No Ack.)
20 2B 25 01 00h (Ack.)
17 Production Inhibit Time Get UINT 0000h