User Manual

8 - 5
IPN 074-471-P1B
HAPSITE ER Operating Manual
8.4.2 Loading a Default Method to the HAPSITE
1 From the Default Methods Menu, select the default method to load. Refer to
Figure 8-3, HAPSITE Default Methods, on page 8-3.
HINT: Refer to Section 8.4.1, Locating Default Methods, on page 8-3 to find
the default methods.
2 Press the Load button. See Figure 8-3, HAPSITE Default Methods, on page
8-3.
3 Press the Save button at the bottom of the Method Editor Description window.
See Figure 8-4.
NOTE: The method file name is the default method name with a two digit
number appended (e.g., 01). If the two digits are not desired, then
remove them from the file name before pressing the Save button.
Figure 8-4 Default Methods Method Editor Description Window