User Manual

8 - 8
IPN 074-471-P1B
HAPSITE ER Operating Manual
8.5 Establishing Communications between the HAPSITE and
Laptop Computer
Establishing communications between the HAPSITE, Laptop and Service Module
(if connected) is necessary to perform many advanced functions. The sections
which follow explain the steps needed to establish communications.
8.5.1 Setting Up Communications
1 Open ER IQ Laptop Software. From the System drop down menu, select
Properties. See Figure 8-7.
Figure 8-7 Selecting Properties from the System Drop-down Menu
NOTE: You must be in Advanced User Mode to setup communications. See
Section 8.8, Access Levels, on page 8-17.
2 Press the HAPSITE List button. See Figure 8-8.
Figure 8-8 HAPSITE List Button
3 Enter the HAPSITE number which is found on the front panel by selecting the
HAPSITE icon, then the HAPSITE System icon and then the HAPS button. For
example: "H1086". Select Add. See Figure 8-9.