User Manual

8 - 10
IPN 074-471-P1B
HAPSITE ER Operating Manual
8.5.2 Configuring the HAPSITE for Communications
1 If communication between the HAPSITE and the Laptop could not be
established using Section 8.5.1, Setting Up Communications, on page 8-8,
continue with Step 2.
2 Press the STAT key on the front panel of the HAPSITE until the System
Parameters page is displayed.
3 Use the arrow keys to highlight NET, push OK SEL. Alternately, touch NET.
The IP address of the HAPSITE will be displayed. Example: 10.210.4.62 /
255.254.0.0. Each HAPSITE will have a unique IP address.
4 On the Laptop, press Start. Depending on the Laptop’s set up follow either Step
4a or Step 4b.
4a Click on Settings, drag the cursor over Network Connections, drag the cursor
over Local Area Connection and click the Left Mouse Button. See Figure
8-12.
NOTE: For wireless connections, select Wireless Network Connection.
Figure 8-12 Network Connections Classic View
4b Click on Connect to, drag the cursor over Show All Connections and click
Left Mouse Button. Click on Local Area Connection. See Figure 8-13.