User Manual

8 - 15
IPN 074-471-P1B
HAPSITE ER Operating Manual
When Add Port is selected, the window shown in Figure 8-20 will appear. Select
the appropriate COM port to add. Select COM1 or the appropriate COM port.
Figure 8-20 Selecting a COM Port to Add
After the COM port has been selected, the COM port will appear in the Port list in
the System Properties window, as shown in Figure 8-21.
Figure 8-21 Port List in Port Settings Tab of System Properties
Press the OK button. The system will automatically establish communications with
a Service Module (if powered on and connected using a RS-232 cable). Please
refer to Section 2.6.1, Setting Up the Service Module, on page 2-17 for more
details.