Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 108
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ODR Activate routing using the ODR protocol. The following modes are
available:
"Disable" - routing using ODR is not performed.
"Hub" - the device acts as a central node.
"Spoke" - the device acts as a peripheral node.
The main advantage of ODR protocol is a network throughput efficient
use. Part of the link throughput is usually used by the routing protocol to
transmit service information, this part can be released by ODR using. The
ODR protocol transmits the hosts IP prefixes using the MINT protocol at
the data link layer.
The ODR protocol can only be used in networks with star topology, where
all nodes are connected to the central node only. An example of such a
network is a point-to-multipoint topology, where each subscriber is
connected only to a base station.
OTA Automatic updates in the MINT domain may be configured in the
following modes:
“Disabled” - the device does not check if other devices in the MINT
domain have a newer software versions.
"Passive" - in case a newer software version is detected on one of the
neighboring nodes, the device requests and updates the software.
The device does not announce own software version.
"Active" - the device announces its software version in the MINT
domain, making it available to download by other nodes.
Log Level Set the log level:
off
normal
detailed
Fixed Cost Allows to set fixed cost value to all routes passing through this
interface
The device will select the route with the lower cost, if any
Extra Cost Allows to add additional cost value to all routes passing through this
interface
Join Cost Allows to add additional cost value to all routes passing through
interfaces that are joined to this interface by the join option