Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 132
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SNMP access parameter Description
User Name Set the authorization user name of SNMP v.3
Password Set the authorization password of SNMP v.3
Security Set the security level:
the lowest level means no authentication or privacy (No
Authorization No Privacy), you have to set the User Name
only
the medium level means authorization and no privacy
(Authorization No Privacy), you have to set User Name and
Password
the highest level means authorization and privacy
(Authorization and Privacy), you have to set the User
Name, Password and Privacy Password
Read only Enable/disable the read-only permission
Read/Write is the default value
Admin Enable/disable the full access to the variables
For example: ability to reboot the device
Limited access is the default value
Privacy Password Set the privacy password
It is necessary when privacy is enabled for the required security
level
24 Table - SNMP Access
7.3.7.2 Traps
SNMPprotocol operation requires a network agent instance to send asynchronous messages (traps) whenever a
specific event occurs on the controlled device (object). InfiNet Wireless units have a built-in "SNMPTraps" support
module (which acts as an agent) that performs a centralized information delivery from unit internal subsystems to
theSNMPserver. This zone focuses on "SNMPTraps" agent configuration.
In this section, you can view and edit the current "SNMPtraps" settings. You can clone, remove and clear target and
traps by clicking the corresponding buttons:
SNMP traps parameter Description
Enable SNMP Traps Enable/disable to send "SNMP traps"
Agent IP Set the IP address of the device which sends traps