Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Introduction – 35
1.
2.
a.
b.
3.
4.
5.
3.7.2 AUX-ODU-SYNCCable gland Assembling
In order to ensure that the cable gland remains sealed under any environmental conditions, please, follow the
assembly sequence according to the procedure below:
Put the cable gland nut (1), the split sealing grommet (2) and the cable gland threaded coupling (3) onto the
cable
Crimp the connector onto the cable using the crimping tool:
For connection to the port Power terminate theFTPCat.5ecablewith the unshielded RJ-45
connector (4) according to the EIA/TIA-568B. Do not use the shielded RJ-45 connector on this end of
the cable as it should be attached on the IDU end (to provide grounding circuit)
For connection to the ports 0-6 use the ready-assembled specialized CAB-SYNCor CAB-SYNC-E(5)
cables
Insert the connector of the pre-terminated cable into the corresponding socket until you hear a click
Screw the cable gland threaded coupling (3) into the port and tighten it. Do not apply excessive force
Tighten the sealing grommet (2) by the cable gland nut (1). Do not apply excessive force.
CAUTION
Missing or bad grounding may leave the unit vulnerable to lightning damage.
CAUTION
Make sure that the connector is well-crimped. A loose connector can damage the device. Please
note that such damage is not covered by the warranty.