Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
6 https://infinetwireless.com/products/accessories
Introduction – 36
10 Figure - Cable gland Assembling scheme
3.7.3 AUX-ODU-SYNCConnection to ODU
To connectAUX-ODU-SYNCto the units use the ready-assembled specializedCAB-SYNCcables for InfiMAN 2x2 and
InfiLINK 2x2 PRO devices orCAB-SYNC-Ecables for InfiMAN Evolution base station sectors. CAB-SYNC and CAB-
SYNC-E must be ordered additionally.Information about CAB-SYNC and CAB-SYNC-E cables is available at Infinet
web site in the "
Accessories
6
" section.
CAUTION
Please note that the pressure equalization system in Infinet devices is performed via gas exchange through
a cable gland and Ethernet cable jacket with a dry room where the power supply is installed. In order to
avoid AUX-ODU-SYNC failure due to moisture entering the device, for example, during the pressure drop
during the rain, the cable gland assembly requirements should be met and there are should be no cracks
in the Ethernet cable jacket.
In addition, you should avoid the Ethernet cable bending near the AUX-ODU-SYNC and pinching with
clamps, that can bring to the pressure equalization system fault between the internal volume of the sealed
AUX-ODU-SYNC and the external environment during a sudden air temperature change. This may lead to
the leakage and device failures.
