Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Installation – 57
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6.2.2 Cable Gland Assembly for Optical Cable
Required components are listed below.
Optical cable.
Optical connector.
SFP module.
Cable gland:
Cable gland nut.
Split sealing grommet (with inner diameter 3.2 mm).
Cable gland threaded coupling.
6.2.2.1 Assemble procedure
Step 1:Put the cable gland nut, the split sealing grommet and cable glandthreaded couplingonto the pre-
terminated optical cable as shown on the figure below.
Step 2:Insert the split sealing grommet into the cable gland threaded coupling.
Step 3:Set the SFP module into the socket until you hear a click.
Step 4:Insert the optical connector into the SFP module.
Step 5:Screw the cable gland threaded coupling into the port and tighten it.
Step 6:Tighten the cable gland nut. Do not apply excessive force.
6.3 Mounting
6.3.1 Pre-installation
Reqiered tools
Screwdriwer set.
Pliers / pipe wrench.
Wrench set.
Additional equipment
GPS receiver.
High magnification binoculars.
NOTE
In order to disassemble SFP, please disconnect the optical cable, pull the clip of the SFP module and
withdraw the SFP module from the slot.

NOTE
SFP module is not included into the packing list.

CAUTION
Before mounting the equipmentin an outdoor environment, please make sure that:
