Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 86
7.2.5 Extended Link Diagnostics
Once a wireless connection between the unit and the remote neighbor is established, it is possible to make
extended diagnostics and optimization for the wireless link.
In order to access the "Extended Link Diagnostics" tools, click on the row of each wireless link within the "Links
Statistics on rf6.0" section:
36 Figure - Extended Link Diagnostics
Five options are available: "Performance Tests", "Antenna Alignment Tool", "Statistics Graphs", "Remote
Commands" and "Link Restart".
7.2.5.1 Performance tests
The "Performance tests" tool performs link throughput tests for the configured channel bandwidth and on the
current frequency, without radio link interruption.
The "Performance tests" tool generates traffic between the devices and displays the channel throughput for the
traffic with chosen priority. For the full throughput tests of the channel, you must set the highest priority “0” for the
test traffic. In this case, the transmission of any other traffic is stopped for the testing time and the traffic generated
by the tool will occupy all the channel.
The "Performance tests" tool displays the values of the full channel throughput which is available under the current
settings, for current bitrate.
Performance tests contains of8 tests performed on established bitrate, test can be performed in one direction or
bidirectionally. 
37 Figure - Performance test
By clicking the «Run Tests»/«Stop Tests» buttons at the bottom of the page, you can start/stop the performance
tests.
By clicking the «Exit Test» button, you return to the "Device Status" page.
NOTE
All results are given in kilobits per second and retries levels are shown as a red chart.
