Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
14 https://wiki.infinetwireless.com/display/DR/WANFleX+-+Technical+User+Manual
15 https://wiki.infinetwireless.com/display/DR/WANFleX+-+Technical+User+Manual
Operation & Administration – 91
44 Figure - Statistics Graphs - RX/TX Load
The load charts display the actual link load information, either in real time or for a set period of time. The yellow
lines represent the total link load, the green lines represent the RX load and the blue lines represent the TX load.
45 Figure - Statistics Graphs - CPU Load & unit temperature
The last chart displays the current CPU load and unit temperature (only for the units equipped with temperature
sensors).
You can view the six graphs presented above into one or two columns per page by clicking the «Change Layout»
button.
7.2.5.4 Remote Commands
The "Remote Commands" tool allows one MINT node to perform commands on another or all MINT nodes in the
network at L2 level usingWANFleX OSCLI commands.
Run the string you typed into the “Command” field by clicking the «Execute» button. For the full list and description
ofWANFleX OSCLI commands, please refer to the
WANFleX OS User Manual
14
.
You can set the key grant access to the remote node using the “Key” textbox and clicking the «Execute» button.
Please note that this key must be prior set at the remote node via CLI (commands "guestKey", "fullKey"- see details
in theWanFlex OS User Manual
15
).