Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
16 https://wiki.infinetwireless.com/display/DR/WANFleX+-+Technical+User+Manual
Operation & Administration – 99
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Interface type Operations
prfX PRF interface makes the Ethernet interface that it is assigned to, to appear as a
regular RF interface in terms of the MINT network (for more information please refer
to the WANFleX OS User Manual
16
)
Configure the IP address(es) and the mask of the interface
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
Set the interface description (up to 72 characters)
Remove the interface
Set the parent interface to be transmitted the encapsulated packets (assign the PRF
interface to the physical Ethernet interface)
Set the channel number (from 0 to 3) on which the frames are sent and received by
the parent interface
Both PRF interfaces (of the two units in the link) must have the same channel
assigned in order to establish the wireless link
vlanX Configure the IP address(es) and the mask of the interface in case you use this
interface for the management of the unit, only (not recommended way)
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
Set the interface description (up to 72 characters)
Remove the interface
Set the parent interface to be transmitted the encapsulated packets
Configure the VLAN tag (or VLAN ID) for the current interface (from 1 to 4094)
In the drop-down window, you can select the vlan interface operation mode:
802.1q - vlan tag operations are performed according to this standard;
802.1ad - double tagging "QinQ";
802.1ah - backbone bridge using mac-in-mac technology described by the
IEEE 802.1ah-2008 standard.
lagX Link aggregation interface is a logical interface used to combine multiple physical
channels into one logical channel in order to increase link capacity and redundancy
(for the units with two physical Ethernet ports)
Configure the IP address(es) and the mask of the interface
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
Set the interface description (up to 72 characters)
Remove the interface
Set the parent interface to be aggregated the encapsulated packets
Enable/disable Fast Mode
tunX Configure the IP address(es) and the mask of the interface
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
Set the interface description (up to 72 characters)
Remove the interface
Set the tunneling mode: IPIP or GRE