Information

The BTN8982TA provides a cost optimized solution for protected high-current PWM motor drives with very low board space consumption.
Product Brief
Product Summary
Type Description Ordering Code
DC Motor Control Shield with
BTN8982TA for Arduino
DC Motor Control Shield with NovalithIC™ integrated half-bridge driver BTN8982TA – and IPD90P04P4L
for reverse polarity protection. For the evaluation of brushed DC motor control applications up to
250W continuous load. Compatible with Arduino Uno R3 and XMC1100 Boot Kit.
DCMOTORCONTRBTN8982TOBO1
NovalithIC BTN8982TA The BTN8982TA is an integrated high-current half-bridge for motor drive applications. It is part of the
NovalithIC™ family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET
with an integrated driver IC in one package (PG-TO263-7).
BTN8982TAAUMA1
Boot Kit XMC1100 Evaluationboard for XMC1100 MCUs series with detachable SEGGER J-Link and RGB LED
Lighting Shield with XMC1202 for Arduino
KIT_XMC11_BOOT_001
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2015 Infineon Technologies AG.
All Rights Reserved.
Visit us:
www.infineon.com
Order Number: B127-I0043-V1-7600-EU-EC-P
Date: 01 / 2015
Attention please!
The information given in this document shall in no event
be regarded as a guarantee of conditions or characteristics
(“Beschaenheitsgarantie”). With respect to any examples
or hints given herein, any typical values stated herein and/
or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warran-
ties and liabilities of any kind, including without limitation
warranties of non-infringement of intellectual property
rights of any third party.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Oice (www.infineon.com).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technolo-
gies Oice. Infineon Technologies Components may only
be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause
the failure of that life-support device or system, or to aect
the safety or eectiveness of that device or system. Life
support devices or systems are intended to be implant-
ed in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable
to assume that the health of the user or other persons may
be endangered.
DC Motor Control Shield
with BTN8982TA for Arduino
Block Diagram
Undervoltage
Detection
Overtemp.
Detection
Slew Rate
Adjustment
Current
Sense
Overcurrent
Detection HS
Overcurrent
Detection LS
Gate Driver HS
Gate Driver LS
LS o HS o
V
S
OUT
IN
INH
SR
IS
GND
Digital Logic
Useful Links
www.infineon.com/arduino
www.infineon.com/novalithIC
www.infineon.com/xmc1000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CAN ICES-3 (B)/NMB-3(B)