User manual

Getting Started – Example –
Blinky based on DAVETM APPs (4/7)
2. Configure Port pin
– Click to add new APP
– Double-click DIGITAL_IO APP and
close window
– Open APP configuration editor
– In APP Dependency view, double-
click DIGITAL_IO
– Configure APP instance
– In APP configuration window, set Pin
direction to Input/Output and set
Initial output level to High
– Assign pin to P0.5
– Click to open Manual Pin
Allocator
– Set Pin Number (Port) to #22
(P0.5)
– Solve and Save
29
2015-05-22 Copyright © Infineon Technologies AG 2015. All rights reserved.