Datasheet

XMC1100
XMC1000 Family
Electrical Parameter
Data Sheet 28 V1.4, 2014-05
Maximum current into
V
DDP
(TSSOP28/16,
VQFN24)
I
MVDD1
SR – 130 mA
3)
Maximum current into
V
DDP
(TSSOP38,
VQFN40)
I
MVDD2
SR – 260 mA
3)
Maximum current out of
V
SS
(TSSOP28/16,
VQFN24)
I
MVSS1
SR – 130 mA
3)
Maximum current out of
V
SS
(TSSOP38,
VQFN40)
I
MVSS2
SR – 260 mA
3)
1) Not subject to production test, verified by design/characterization. Hysteresis is implemented to avoid meta
stable states and switching due to internal ground bounce. It cannot be guaranteed that it suppresses
switching due to external system noise.
2) An additional error current (
I
INJ
) will flow if an overload current flows through an adjacent pin.
3) Not subject to production test, verified by design/characterization.
4) Not subject to production test, verified by design/characterization. However, for applications with strict low
power-down current requirements, it is mandatory that no active voltage source is supplied at any GPIO pin
when V
DDP
is powered off.
Table 11 Input/Output Characteristics (Operating Conditions apply) (cont’d)
Parameter Symbol Limit Values Unit Test Conditions
Min. Max.
Subject to Agreement on the Use of Product Information