User manual
XMC 2Go
XMC 2Go Kit with XMC1100
Overview
Board Users Manual 7 Revision 1.0, 2014-02-20
Introduction
This document describes the features and hardware details of the XMC 2Go equipped with the ARM® Cortex™-
M0 based XMC1100 Microcontroller from Infineon Technologies AG.
1 Overview
The XMC 2Go is designed to evaluate the capabilities of the XMC1100 Microcontroller and the powerful, free of
charge tool chain DAVE™.
This board is not cost optimized and does not serve as a reference design.
1.1 Key Features
Table 1 summarizes the features of the XMC 2Go.
Table 1 Features of the XMC 2Go Kit with XMC1100
Topic
Features
Processor
XMC1100 microcontroller (ARM® Cortex™-M0 based) in a 4 x 4 mm VQFN-24
package
Flash
64 kB
RAM
16 kB
Clock Generation
Internal Oscillator
Frequencies
32 MHz CPU clock, 64 MHz Timer clock
Dimensions
14.0 x 38.5 mm
Power Supply
from USB via Debug probe (J-Link) or
3.3V external power
Connectors
Two 8-pin header (pin pitch: 2.54 mm ≙ 0.1” / between rows: 10.16 mm ≙ 0.4”)
Pin header fits to breadboard
Debugger
On-Board J-Link Debugger supports
Serial Wire Debug (SWD, ARM Standard)
Single Pin Debug (SPD)
UART-to-USB bridge (virtual COM)
Peripherals
Mapped to pin header X1/X2:
2 Channel USIC (UART, SPI, I2C, I2S, LIN)
6 Channel Analog to Digital Converter (12-Bit resolution)
4 x 16-Bit Timer
External Interrupts (via ERU)
Others:
Real Time Clock
Random Number Generator
Others
2 User LEDs @ P1.0 and P1.1