Datasheet

XC164-32
Derivatives
Electrical Parameters
Data Sheet 57 V1.1, 2006-08
6) All inputs (including pins configured as inputs) at 0 V to 0.1 V or at V
DDP
- 0.1 V to V
DDP
, all outputs (including
pins configured as outputs) disconnected. This parameter is tested at 25 °C and is valid for
T
J
≥ 25 °C.
7) This parameter is determined mainly by the current consumed by the oscillator switched to low gain mode (see
Figure 12). This current, however, is influenced by the external oscillator circuitry (crystal, capacitors). The
given values refer to a typical circuitry and may change in case of a not optimized external oscillator circuitry.