Datasheet

C167CS-4R
C167CS-L
Data Sheet 63 V2.2, 2001-08
AC Characteristics
Figure 16 CLKOUT Signal Timing
Variable Memory Cycles
The bus timing shown below is programmable via the BUSCONx registers. The duration
of ALE and two types of waitstates can be selected. This table summarizes the possible
bus cycle durations.
Table 15 CLKOUT Reference Signal
Parameter Symbol Limits Unit
min. max.
CLKOUT cycle time
tc
5
CC 40/30/25
1)
1)
The CLKOUT cycle time is influenced by the PLL jitter (given values apply to f
CPU
= 25/33/40 MHz).
For a single CLKOUT cycle (2 TCL) the deviation caused by the PLL jitter is below 1 ns (for
f
CPU
> 25 MHz).
For longer periods the relative deviation decreases (see PLL deviation formula).
ns
CLKOUT high time
tc
6
CC 8 – ns
CLKOUT low time
tc
7
CC 6 – ns
CLKOUT rise time
tc
8
CC – 4ns
CLKOUT fall time
tc
9
CC – 4ns
Table 16 Variable Memory Cycles
Bus Cycle Type Bus Cycle Duration Unit 25/33/40 MHz, 0 Waitstates
Demultiplexed bus cycle
with normal ALE
4 + 2
× (15 - <MCTC>)
+ 2
× (1 - <MTTC>)
TCL 80 ns / 60.6 ns / 50 ns
Demultiplexed bus cycle
with extended ALE
6 + 2
× (15 - <MCTC>)
+ 2
× (1 - <MTTC>)
TCL 120 ns / 90.9 ns / 75 ns
Multiplexed bus cycle
with normal ALE
6 + 2
× (15 - <MCTC>)
+ 2
× (1 - <MTTC>)
TCL 120 ns / 90.9 ns / 75 ns
Multiplexed bus cycle
with extended ALE
8 + 2
× (15 - <MCTC>)
+ 2
× (1 - <MTTC>)
TCL 160 ns / 121.2 ns / 100 ns
MCT04415
CLKOUT
tc
5
tc
6
7
tc
8
tc
9
tc