User's Manual

InfiNet Wireless R5000 Technical User Manual

• sid mode. The sid regime allows estimating the number of currently

operating subscriber groups having different identifiers (SID), and the

efficiency of air links utilization. The analysis is carried out for all network

identifiers at the frequency previously specified for the radio module by

rfconfig command.

Load Meter

Load meter is a powerful tool that allows estimating the load of a system

interface specified by interface parameter. By default, the information is

displayed on one line and updated every second; the load is measured in

kilobytes.

Below picture shows the load meter output for the radio interface outputted in

line-by-line mode with one second interval.

To run load meter like it is shown above, please type:

loadm –l <IF-NAME>

Acquiring interfaces statistics

Interface statistics can be acquired using netstat module which includes two

modes:

• Routing tables output (using “-r” parameter with the command)

• Interfaces statistics output (using “-i” parameter with the command)

Below picture shows the example of interfaces statistics output.