User's Manual
InfiNet Wireless R5000 Technical User Manual
Copyright © 2004-2011 by InfiNet Wireless
58
• Device name – general device name
• User Name - user Name used as Login
• Password - secret password used to login into the unit
• Confirm Password - password confirmation
• Keep current system password – saves currently used password in the
unit’s configuration and locks “Password” and “Confirm Password” fields.
In case this check-box is leaved unchecked and “Password” and “Confirm
Password” fields are empty some web browsers may spontaneously put
random data into them so that after the configuration is applied the
password will be unknown to the user
• WEB Interface language – defines the language of WEB-interfaces (saves
your language choice in the configuration and uses it in the next
sessions from the start).
To change the language of your current session only, please refer to the
“Localization” section of the “Web-interface” chapter.
SNTP and Time Zone settings:
• Start SNTP – starts SNTP service
• SNTP IP Address - sets SNTP server IP-address
• Time Zone – sets Time Zone. For more details on time zones please visit:
http://en.wikipedia.org/wiki/Time_zone.
Radio Settings
This section allows viewing/setting the following radio parameters:
• Interface –available radio interface
• Type – network type of the node (Master, Slave)
• MultiBS - this option enables the Slave node to constantly check the link
quality and try to find another BS if the quality become worse. When the
option is disabled then if the link breaks the node will firstly try to
reconnect to the same BS regardless of the link quality.
• Channel Width - operating channel bandwidth of the radio in MHz. Must
be equal at both sides of the link