User's Manual

InfiNet Wireless R5000 Technical User Manual

Antennas and cables are electric conductors. Incidental electrostatic strikes may

occur during the system installation. This can lead to equipment damaging or

may hurt the personnel. While installing or changing the elements of the

antenna-feeder system one must make sure that open metal parts are

temporarily grounded.

Do not install the antenna close to the electric power lines. Antenna and antenna

pole have to be installed in such a way that while their assembling,

disassembling and repairing they did not have any contact with power lines.

Basic precaution measures that must be fulfilled during the installation are the

following:

 Do not stay on the roof top in windy or rainy weather, during the

thunderstorm or when the working zone is covered with snow or ice

 Do not touch the antennas, antenna poles, cables and lighting arrestors

during the thunderstorm

 Antenna placement should not be close to electric or telephone lines.

Safe distance is a distance that is a sum of the two antenna poles

heights and antenna height

 Antenna cable must be grounded at all times (not relevant for 5000-M

modifications)

In case of failure any manipulations with the equipment are allowed

to skilled personnel only.