User's Manual

InfiNet Wireless R5000 Technical User Manual
Copyright © 2004-2011 by InfiNet Wireless
57
4. Basic settings
On the ―Basic Settings‖ page the device configuration is performed. All the
parameters that are available for configuration are divided into the dedicated
sections (e.g. ―System Settings‖, ―Radio Settings‖).
To show/hide the parameters of the section just click on the section‘s header.
The listing and description of all the sections can be found below in this chapter.
To view the configuration that is done on the ―Basic Settings‖ page in a CLI-
based format, please use ―Preview Configuration‖ button.
To apply the configuration changes to the unit use ―Apply‖ button.
After pressing "Apply" button the unit's current configuration will be
updated according to the parameters set on the ―Basic Settings‖ page.
The unit will be turned into the switch mode.
―Test‖ button allows applying temporary configuration. The original (previous)
configuration restores automatically after 3 minute period (180 seconds). The
period can be extended and the changes can be either accepted or rejected
immediately.
Description of the sections:
System Settings
This section allows viewing/setting system parameters of the unit‘s configuration: