User Manual
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Web GUI Access
- Dashboard
- Device status
- Wired interface
- Wireless link status
- Modulation code scheme
- Modulation and coding schemes are selected independently for each channel (uplink and downlink) for both polarizations. Current modulation for each channel is displayed in the MCS subsection.
- Received signal strength indicator
- EVM
- Retries and Frame loss
- General settings
- Security settings
- Radio settings
- Network settings
- Switch Settings
- SNMP settings
- Spectrum Analyzer
- Antenna Alignment Tool
- Maintenance
- Instant DFS
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – Quanta 5 / Quanta 6
Introduction– 16
•
•
•
•
•
•
•
•
•
•
•
2 Frequency range:
5- device in the range of 5 GHz.
6- device in the range of 6 GHz.
3 Antenna gain:
18 - integrated antenna with 18 dBi gain;
23 - integrated antenna with 23 dBi gain;
25 - integrated antenna with 25 dBi gain;
E - devices for an external antenna connection.
3.5 Power supply
Indoor AC/DC injector IDU-CPE-G(24W)(see page 16)
Indoor AC/DC injector IDU-CPE-G(see page 18)
Indoor AC/DC injector with integrated lightning protection IDU-BS-G(60W)(see page 21)
Indoor DC/DC injector for all InfiNet Wireless' units with integrated lightning protection IDU-LA-G(V.01)(see
page 23)
Lightning Protection Unit with Injector AUX-ODU-INJ-G(see page 25)
3.5.1 Indoor AC/DC injector IDU-CPE-G(24W)
1 Figure - IDU-CPE-G(24W)
IDU-CPE-G(24W) is an indoor Gigabit PoE injector which supports 100-240 V input range from the AC mains. IDU-
CPE-G(24W) feeds 48 VDC power to the device by injecting it to the CAT5 Ethernet cable.