User Manual
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Web GUI Access
- Dashboard
- Device status
- Wired interface
- Wireless link status
- Modulation code scheme
- Modulation and coding schemes are selected independently for each channel (uplink and downlink) for both polarizations. Current modulation for each channel is displayed in the MCS subsection.
- Received signal strength indicator
- EVM
- Retries and Frame loss
- General settings
- Security settings
- Radio settings
- Network settings
- Switch Settings
- SNMP settings
- Spectrum Analyzer
- Antenna Alignment Tool
- Maintenance
- Instant DFS
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – Quanta 5 / Quanta 6
Operation & Administration – 92
•
•
7.11.2 License
License containsinformation about allowed frequencies, channel width and power limit.This section allows to view
the current license and upload a new one.To upload a license on device, click the "Upload license" button drag and
drop a file from your file manager into the dotted area.
7.11.3 Firmware
There are two options to upgrade firmware on the device:
Manually - new firmware should be downloaded from official Infinet FTP server:
ftp://ftp.infinet.ru/pub/
Firmware/.Click on "Upload firmware" button and choose a firmware file. Or you can drag and drop a file
from your file manager into the dotted area.
Automatically - if connected to the Internet, the device can automatically detect the new software version.
In this case, click the "Update" button, after that your web browser will try to download the latest firmware
version and upload it to the unit.Firmware will be applied after unit reboot.
7.11.4 Configuration
The device allows to upload, download and view current configuration in text form.To view the configuration, click
the "Show current configuration" button, the file will open in new window.To download the configuration, click the