User's Manual

Table Of Contents

In order to mount using MOUNT-KIT-85C follow the guidelines below:

• Attach the small mounting bracket (1) to the device using the supplied

clamps. Ensure that the bracket fits correctly.

• Attach the mount arm (3) to the bracket and tighten the bolt (2).

• If mounting to a wall or other flat surface, attach the metal plate (5) to

the surface, assemble the binding and tighten bolts (2) and (4) until the

unit is fixed in position.

• If mounting to a pole (30 to 85 mm diameter), assemble the pole

mounting bracket (5, 6) on the designated position. Using the 13mm

wrench tighten the bolts (7) until the bracket is fixed in position, attach

the unit with the mounting assembly and tighten the bolt (4).

• If there is a need for further alignment adjustments loosen the bolts (2)

and (4), adjust the unit's position and tighten the bolts again.