User's Manual
Table Of Contents
- Table of contents
- I. Getting Started
- II. Hardware description
- III. Installation procedure
- 1. Installation preparations
- 2. InfiNet Wireless R5000-Omx/Omxb
- 3. InfiNet Wireless R5000-Lmn
- 4. InfiNet Wireless R5000-M/Mm and R5000-Smn/Smnb/Smnc
- 5. Mounting kit (MOUNT-KIT-85)
- 8. InfiNet Wireless R5000-Smnc
- II. Configuration (Web-interface)
- III. Configuration (CLI)
- IV. Link setup
- V. Lost password recovery
- VI. Recommendations
- VII. Supplementary information
80
Copyright © 2004-2012 by InfiNet Wireless
This chart displays measured RX (green) and TX (blue) signal levels. Red regions
represent link outages. Default graph uses CINR measurement method, however
RSSI method can be selected from the drop-down menu.
RX/TX Retries (%)
This chart displays retry percentage – an important parameter, that provides a
quick estimation of the link quality. Similar to the previous graphs RX retries are
represented by the green lines, TX retries – by the blue lines and link outages –
by the red lines.
RX/TX Bitrate (Mbps)