User's Manual
Table Of Contents
- Table of contents
- I. Getting Started
- II. Hardware description
- III. Installation procedure
- 1. Installation preparations
- 2. InfiNet Wireless R5000-Omx/Omxb
- 3. InfiNet Wireless R5000-Lmn
- 4. InfiNet Wireless R5000-M/Mm and R5000-Smn/Smnb/Smnc
- 5. Mounting kit (MOUNT-KIT-85)
- 8. InfiNet Wireless R5000-Smnc
- II. Configuration (Web-interface)
- III. Configuration (CLI)
- IV. Link setup
- V. Lost password recovery
- VI. Recommendations
- VII. Supplementary information
85
Copyright © 2004-2012 by InfiNet Wireless
6. Maintenance
The “Maintenance” page allows performing service tasks for the device
maintenance.
The «Firmware» section of the page shows current firmware version, firmware
build date, serial number and system up time.
“Check Latest Release” and “Check Latest Beta” buttons allow automatic
software upgrade. The system checks for updates on the InfiNet Wireless
repository and automatically downloads new releases.
Note that the unit does not have to have access to the Internet for this
feature to work. However the PC that is used to initialize the upgrade
procedure must have access to IW website (both http and ftp).
The «Upload»/«Download» sections allow uploading and downloading license
files, firmware and configuration on/off the device.
The following buttons can be used:
• «Reboot» button - reboots the device
• «Restore Factory Settings» button - restores factory default configuration
• “View Current License” button - shows current device license parameters
in a separate window