Quick Start Manual

InfiNet Wireless Router Quick start guide
Copyright © 2004-2006 by InfiNet Wireless Limited.
10
Accessing the router via Console
If you cannot get access to the router using procedure described in “Accessing
the router via Ethernet” section please follow the steps described in this section.
1. Using InfiNet Console Cable please connect the router’s console port (see
Fig. 2) to the COM-port of your PC/Laptop
In order to accomplish the steps described in this section your
PC/Laptop must be equipped with a COM-port
2. Locate the power cord in the package
3. Plug the power cord into the IDU power supply connector and to the power
supply socket (110V 60 Hz)
4. Green power indicator on the IDU must light up
5. Power your PC/Laptop on
Following step’s screenshots are taken from Microsoft Windows XP.
You can also perform this procedure in Microsoft Windows
98/NT/2003
6. Run Hyperterminal. See Figure 4
Figure 4. Locate Hyperterminal
7. Indicate connection name (e.g. “IWR Lab Test”) and specify the COM-port
name to which the router is connected. See Figure 5
Figure 5. Select the port