Quick Start Manual
Table Of Contents
InfiNet Wireless Router Quick start guide
Copyright © 2004-2006 by InfiNet Wireless Limited.
14
Figure 14. Change IP-address
6. If you are in a LAN and you do not want to change your primary IP-address
so you could keep LAN connectivity, you can assign an alias. In order to do
that, press “Advanced…” button (Figure 14). In “Advanced TCP/IP Settings”
click “Add” and put alias IP-address and mask (e.g. “10.10.10.2” and
“255.255.255.0” correspondingly). See Figure 15. Click OK in all windows
opened in the described procedure.
Figure 15. Create alias
7. Run “Telnet” utility using “Start->Run” and typing “telnet IP-address” where
IP-address is either the IP-address configured at Step 5 or alias configured
at Step 6.
8. Follow Steps 9 to 11 of “Accessing the router via Console” section in order to
change the IP-address on the eth0 interface on the router to the desired
one.