User's Manual
Table Of Contents
- Table of contents
- FCC Regulatory Notice
- Industry Canada Regulatory Notice
- Antenna installation and operation information
- I. Getting Started
- II.Hardware description
- III.Installation procedure
- IV. Device configuration instructions
- V. Link Configuring
- VI. Services, features and tools
- VII.GUI “InfiNet Wireless Router Manager”
- VIII.Recommendations
- IX. Supplementary information
InfiNet Wireless R5000 Technical User Manual
Copyright © 2004-2006 by InfiNet Wireless Limited.
5
The data network built on InfiNet Wireless products is implemented as a routed
IP network which reduces flooding and broadcast messages specific to bridged
networks and to implementation of Quality-of-Service (QoS) features set. QoS
definitions per subscriber’s data flows are effectively mapped on MAC level flow
attributes.
Each device in the network can be configured using serial console port, Telnet
protocol or HTTP (web-based).
RAPS (Remote Access Permission Service) provides a whole network with a
flexible mechanism of a centralized management, configuration and monitoring.
The software/firmware is fully upgradeable for all InfiNet Wireless routers. New
firmware images can be downloaded from the InfiNet Wireless web-site
http://www.infinetwireless.com for its further uploading on the device.
3. Abbreviations
The following abbreviations are used in this document:
• BS – Base Station
• CPE – Customer Premises Equipment (also called subscriber or
subscriber unit)
• ODU – Outdoor Unit (relevant for 5000-O and 5000-M modifications)
• IDU – Indoor power supply Unit (relevant for 5000-O and 5000-M
modifications)
• RF cable – Radio Frequency cable to connect ODU and antenna/Router
and antenna for 5000-O and 5000-I modifications correspondingly
• LOS – Line-of-Sight
• STP cable – Shielded Twisted Pair cable to connect ODU and IDU
(relevant for 5000-O and 5000-M modifications)
• PTP – Point-to-Point topology
• PTM – Point-to-Multipoint topology
• RMA – Routed Multiple Access Protocol
4. Document marks
All warnings are marked with a special warning sign. One should pay
a great deal of attention to what is written in the Warning sections.
All notes are marked with a special note sign. Notes usually contain
useful comments or hints to the described section of the document.
5. Warranty terms
The manufacturer guarantees a reliable work of the product during 12 month
from the date of product installation but no later than 15 months from the date
of delivery of equipment to distributor. The warranty is not spread for the
devices which stopped working properly due to improper usage, careless
treatment, incorrect deployment or exploitation. The warranty voids in the
following cases: