User's Manual
Table Of Contents
- Table of contents
- FCC Regulatory Notice
- Industry Canada Regulatory Notice
- Antenna installation and operation information
- I. Getting Started
- II.Hardware description
- III.Installation procedure
- IV. Device configuration instructions
- V. Link Configuring
- VI. Services, features and tools
- VII.GUI “InfiNet Wireless Router Manager”
- VIII.Recommendations
- IX. Supplementary information
InfiNet Wireless R5000 Technical User Manual
Copyright © 2004-2006 by InfiNet Wireless Limited.
50
CPE – Customer Premises Equipment)
For each CPE there can be several configured BS. Surely, CPE at the moment can
be registered only at one BS. Each BS is represented by three parameters: SID
of the searched BS, requested transmitting speed and list of frequencies where
the BS should be searched at. Each time RMA is run or CPE looses registration at
the BS, it starts searching for a new BS scanning through the list of configured
BS.
If CPE is registered at the BS, the application will show all the registration
parameters and, if required, update them periodically:
• BS working frequency
• Requested speed from the BS
• System identifier (SID)
• IP-address for the radiointerface from the side of the BS. For CPE, the
address for the radiointerface will be assigned automatically.
• Signal levels from BS and to BS
• Current upstream and downstream speeds