User's Manual

v1.0 4 V-TAG Manual
2.0 Getting Started
To start using your V-TAG RFID tags, insert batteries into each tag. The LED light on
the tag should blink once every 20 seconds indicating normal operation.
To start using your V-TAG USB Gateway, attach the gateway to a USB port on a PC
running Windows XP, Vista, Windows 7 or Windows 8. Select “OK” when the operating
system asks to use the Internet to locate drivers.
Install the InfinID Technologies, Inc. AssetWorx! asset tracking software on your PC by
running setup.exe and following the prompts.