Kiosk thermal printer User Manual KPM-210, 216

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS

KPM210/216

393-

[Description] Turns white/black reverse printing mode on or off.

• When the LSB of n is 0, white/black reverse printing is

turned off.

• When the LSB of n is 1, white/black reverse printing is

turned on.

[Notes] • Only the LSB di n is effective.

• This command is available for both built-in and user-defined

characters.

• This command does not affect bit image, downloaded bit

image, bar code, HRI characters and spacing skipped by HT,

ESC $ and ESC \.

• This command does not affect white space between lines.

• White/black reverse mode has a higher priority than under-

line mode. Even if underline mode is on, it will be disabled

(but not cancelled) when white/black reverse mode is se-

lected.

[Default] n = 0

[Reference]

[Example]

mn0CSGmn0CSG

mn0CSG

mn0CSGmn0CSG

[Name] Select counter print mode

[Format] ASCII GS C 0 n m

Hex 1D 43 30 n m

Decimal 29 67 48 n m

[Range] 0 ≤ n ≤ 5

m = 0, 1, 2, 48, 49, 50

[Description] Selects a print mode for the serial number counter.

• n specifies the number of digits to be printed as follows:

when n = 0, the printer prints the actual digits indicated by the

numeric value.

when n = 1 to 5, the command sets the number of digits to

be printed.

• m specifies the printing position within the entire range of

printed digits as follows: