Kiosk thermal printer User Manual KPM-210, 216

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS

KPM210/216

473-

[Description] Sets the printing area width to the area specified by nL and

nH.

• The value of nMax is :

- 1664 for the 204 dpi model

- 2484 for the 300 dpi model

• The left margin is set to [(nL + nH × 256) × (horizontal mo-

tion unit)] inches.

Printable area

Left margin Printing area width

[Notes] • This command is only enabled if set at the beginning of the

line.

• If the right margin is greater than the printable area, the

printing area width is set at maximum value.

• If the printing area width = 0, it is set at the maximum value.

• The horizontal and vertical motion units are specified by

GS P. Changing the horizontal or vertical motion unit does not

affect the current left margin.

• The GS P command can change the horizontal (and verti-

cal) motion unit.

• However, the value cannot be less than the minimum hori-

zontal movement amount and it must be in even units of the

minimum horizontal movement amount.

[Default]

[Reference] GS L, GS P

[Example]

mtr^SGmtr^SG

mtr^SG

mtr^SGmtr^SG

[Name] Execute macro

[Format] ASCII GS ^ r t m

Hex 1D 5E r t m

Decimal 29 94 r t m

[Range] 0 ≤ r, t ≤ 255