Maintenance Manual

MA-18
ENGINE MAINTENANCE
Revision: 2004 October 2004 M45
Checking EVAP Vapor Lines ALS00020
1. Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections,
chafing and deterioration.
2. Inspect fuel tank filler cap vacuum relief valve for clogging, sticking, etc.
Refer to EC-692, "
EVAPORATIVE EMISSION SYSTEM" .
Checking Cooling Fan Fluid Level and Lines ALS00021
● Check that there is no fluid leaking from any hose connection or
any other part.
● Check the fluid level with level gauge on the reservoir tank cap.
If there is too much or too little, adjust the amount of fluid.
● Check that under the fluid temperature conditions below, the
fluid level is within the “COLD” or “HOT” range on the level
gauge.
NOTE:
● There is no specified timing for replacing the fluid.
● The total fluid volume is 777 ml (26.3 US floz, 27.4 lmp floz) (with the cold maximum on level gauge when
engine is cold).
Spark plug:
: 24. 6 N·m (2.5 kg-m, 18 ft-lb)
COLD : Fluid temperature 0 - 30 °C (32 - 86 °F)
HOT : Fluid temperature 50 - 80 °C (122 - 176 °F)
PBIC2613E