Owner's Manual

2-40 Instruments and controls
SIC3269
Headlight beam select
*
1
To select the low beam, put the lever
in the neutral position as shown.
*
2
To select the high beam, push the
lever forward while the switch is in the
position. Pull it back to select the
low beam.
*
3
Pulling the lever toward you will flash
the headlight high beam even when
the headlight switch is in the OFF
position.
Battery saver system
A chime will sound when the driver side
door is opened with the light switch in the
or position and the ignition switch
in the OFF or LOCK position.
When the headlight switch is in the
or
position while the ignition switch is in
the ON position, the lights will automati-
cally turn off after a period of time when
the ignition switch has been pushed to the
OFF position.
When the headlight switch remains in the
or position after the lights
automatically turn off, the lights will turn
on when the ignition switch is pushed to
the ON position.
CAUTION
. When you turn on the headlight switch
again after the lights automatically turn
off, the lights will not turn off auto-
matically. Be sure to turn the light
switch to the OFF position when you
leave the vehicle for extended periods of
time, otherwise the battery will be
discharged.
. Never leave the light switch on when the
engine is not running for extended
periods of time even if the headlights
turn off automatically.