Owner's Manual

2-46 Instruments and controls
SIC2770
FRONT
The front seats can be warmed by built-in
heaters. The switches located on the
instrument panel can be operated inde-
pendently of each other.
1. Start the engine.
2. Select heat range.
.
For high heat, push the HI (High)
side of the switch
*
1
.
.
For low heat, push the LO (Low) side
of the switch
*
2
.
.
The indicator light
*
3
will illuminate
when the heater is on.
3. To turn off the heater, push the “HI” or
“LO” side (whichever is selected) of the
switch. Make sure the indicator light
turns off.
SIC2770
REAR
The 2nd row outboard seats are warmed by
built-in heaters. The switches located on
the back side of the center console can be
operated independently of each other.
1. Start the engine.
2. Select heat range.
*
1
For high heat, push the HI (High)
side of the switch.
*
2
For low heat, push the LO (Low) side
of the switch.
The indicator light in the switch
*
3
will
illuminate when the heater is on.