Owner's Manual

unconsciousness or death.
PROGRAMMING HomeLink
®
If you have any questions or are having
difficulty programming your HomeLink
®
buttons, refer to the HomeLink
®
web site
at: www.homelink.com or call 1-800-355-
3515.
NOTE:
It is also recommended that a new battery
be placed in the hand-held transmitter of
the device being programmed to
HomeLink
®
for quicker programming and
accurate transmission of the radio-fre-
quency.
1. Position the end of your hand-held
transmitter 1-3 in (26-76 mm) away
from the HomeLink
®
surface, keeping
the HomeLink
®
indicator light
*
1
in
view.
JVI0428X
2. Using both hands, simultaneously
press and hold the desired HomeLink
®
button and handheld transmitter but-
ton. DO NOT release until the
HomeLink
®
indicator light
*
1
flashes
slowly and then rapidly. When the
indicator light flashes rapidly, both
buttons may be released. (The rapid
flashing indicates successful program-
ming.)
NOTE:
Some devices to be programmed may
require you to replace Step 2 with the
cycling procedure noted in the “Pro-
gramming HomeLink
®
for Canadian
customers and gate openers” later in
this section.
Instruments and controls 2-69